AWWA C207-18
AWWA C207-18 Steel Pipe Flanges for Waterworks Service, Sizes 4 In. Through 144 In. (100 mm Through 3,600 mm)
standard by American Water Works Association, 04/01/2018
Categories
- ASME BPVC 2019
- ANSI
- ASME
- ASME BPVC
- API
- ASTM
- SAE
- BS
- 2019
- 2020
- 9000
- AASHTO
- AATCC
- ABMA
- ACC
- ACI
- ARINC
- AS
- ASA
- ASD-STAN
- ASQ
- AWS
- AWWA
- B11
- BHMA
- CAN/CGSB
- CAN/ULC
- CECC
- CGA
- CIE
- CII
- CISPR
- DOXPUB
- DS
- ETSI
- ETST
- EU
- EURO
- FCI
- GMW
- GPA
- HI
- IEC
- IEEE
- IES
- ISO
- JIS
- MSS
- NCSL
- NETA
- New Standards
- NSF
- PIP
- RICA
- RTCA DO
- SMACNA
- TIA
- TMS
- USP
- UTS
- VDI
Full Description
This standard describes ring-type slip-on flanges and blind flanges. The flange pressure limits and the tables that describe them are1. Ring-type, slip-on flanges (see Tables 2, 3, and 4).
2. Blind flanges (see Table 5). Unless otherwise specified by the purchaser, the manufacturer shall select the type to be used.
Flanges in this standard are intended for use with steel pipe, fittings, or appurtenances meeting the requirements of ANSI/AWWA C200, ANSI/AWWA C208, or other equivalent standards. It is intended that flanges be attached by welding in accordance with Sec. 4.3 of this standard.
Cart
(empty)
New products
- Advances in Information Storage Systems: Volume 5
- Intelligent Engineering Systems Through Artificial Neural Networks: Volume 3
- Journal of Dynamic Systems Measurement and Control Special 50th Anniversary Issue
- 1993 Piping Engineering and Operation
- ASME Y14.5M-1994 (R2004)
- ASME B5.50-1994 (R2003)
- Report On Vitrification Of Residue(Ash) From Municipal Waste Combustion Systems
- ASME B5.10-1994 (R2013)
- ASME B107.9M-1994 [ Withdrawn ]
- ASME B30.14-1996
- ASME Y14.8M-1996 (R2008)
- Intelligent Engineering Systems Through Artificial Neural Networks: Volume 6
- ASME Y14.35M-1997 (R2008)
- ASME B29.10M-1997 (R2019)
- ASME PTC 12.3-1997 (R2019)
- ASME PTC 19.11-1997 (R2004)
- ASME B107.42M-1997 (R2004)
- ASME B1.5-1997 (R2014)
- ASME A112.6.1M-1997 (R2017)
- ASME NQA-1-1997
- ASME PTC 12.2-1998
- ASME B18.6.4-1998 (R2005)
- ASME B18.6.2-1998 (R2010)
- The Virtual Engineer: 21st Century Product Development
- Total Quality Development A Step by Step Guide to World Class Concurrent Engineering (Soft Cover)
